A concrete fix for global warming.

Carbon dioxide in concrete: This micrograph shows the crystal structure of concrete cured in the presence of carbon dioxide. A Canadian company says that its curing process can store 60 tons of carbon dioxide inside 1,000 tons of precast concrete products, such as concrete blocks, while saving energy. Credit: Carbon Sense Solutions

A Canadian company says that it has developed a way for makers of precast concrete products to take all the carbon-dioxide emissions from their factories, as well as neighboring industrial facilities, and store them in the products that they produce by exposing those products to carbon-dioxide-rich flue gases during the curing process. Industry experts say that the technology is unproven but holds great potential if it works.

Concrete accounts for more than 5 percent of human-caused carbon-dioxide emissions annually, mostly because cement, the active ingredient in concrete, is made by baking limestone and clay powders under intense heat that is generally produced by the burning of fossil fuels. Making finished concrete products--by mixing cement with water, sand, and gravel--creates additional emissions because heat and steam are often used to accelerate the curing process.

But Robert Niven, founder of Halifax-based Carbon Sense Solutions, says that his company's process would actually allow precast concrete to store carbon dioxide. The company takes advantage of a natural process; carbon dioxide is already reabsorbed in concrete products over hundreds of years from natural chemical reactions. Freshly mixed concrete is exposed to a stream of carbon-dioxide-rich flue gas, rapidly speeding up the reactions between the gas and the calcium-containing minerals in cement (which represents about 10 to 15 percent of the concrete's volume). The technology also virtually eliminates the need for heat or steam, saving energy and emissions.

Work is expected to begin on a pilot plant in the province of Nova Scotia this summer, with preliminary results expected by the end of the year. If it works and is widely adopted, it has the potential to sequester or avoid 20 percent of all cement-industry carbon-dioxide emissions, says Niven. "If the technology is commercialized as planned, it will revolutionize concrete manufacturing and mitigate hundreds of megatons of carbon dioxide each year, while providing manufacturers with a cheaper, greener, and superior product." He adds that 60 tons of carbon dioxide could be stored as solid limestone--or calcium carbonate--within every 1,000 tons of concrete produced. Further, he claims that the end product is more durable, more resistant to shrinking and cracking, and less permeable to water.

"It almost sounds too good to be true," says civil engineer Rick Bohan, director of construction and manufacturing technologies at the Portland Cement Association, in Skokie, Illinois. He points out that the idea of concrete carbonation has been around for decades but has never been economical as a way to strengthen or improve the finished product. In the late 1990s, researchers showed how carbon dioxide could be turned into a supercritical fluid and injected into concrete to make it stronger, but the required high pressures made the process too energy intensive. Carbon Sense Solutions claims to achieve the same goal but under atmospheric pressure and without the need for special curing chambers. "I'd be really skeptical," adds Bohan. "But if someone has a revolutionary process, we'd love to see it."